Communicate with Supplier? Supplier
HUANG HUILIN Mr. HUANG HUILIN
What can I do for you?
Contact Supplier
 Tel:86-574-55846560 Email:manager@rfbearings.com

Shaft Protecting Sleeve - manufacturer, factory, supplier from China

(Total 12 Products for Shaft Protecting Sleeve)

  • Bearing Components WITHDRAWAL SLEEVE

    Bearing Components WITHDRAWAL SLEEVE

    • Model No.: WITHDRAWAL SLEEVE

    Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts The Bearing Components WITHDRAWL SLEEVE is pressed into the bore of the bearing inner ring which abuts a shaft shoulder or similar fixed component The Components WITHDRAWL SLEEVE is located on the shaft by...

    Contact Now

  • Adapter Sleeves AH/AHX3000 Series

    Adapter Sleeves AH/AHX3000 Series

    • Model No.: AH/AHX3000 Series

    Adapter Sleeves AH AHX3000 Series can be used when welding cables smaller than indicated on mold tag Threads located on the small end of the tapered sleeve are used in conjunction with a nut to push the bearing up the tapered surface This allows the bearing and sleeve to seat firmly in place SLEEVE d1 D1 L

    Contact Now

  • Adapter Sleeves AH/AHX2300 Series

    Adapter Sleeves AH/AHX2300 Series

    • Model No.: AH/AHX2300 Series

    Adapter Sleeves AH AHX2300 Series can be used when welding cables smaller than indicated on mold tag Metric Shaft Adapter AH AHX2300 Series slide over the cable to adapt smaller size cables to a larger size mold Threads located on the end of the tapered sleeve are used in conjunction with a nut to push the bearing up...

    Contact Now

  • Adapter Sleeves H3200 Series

    Adapter Sleeves H3200 Series

    • Model No.: H3200 Series

    Adapter Sleeves H3200 Series serve to mount and remove bearings with tapered bores onto cylindrical shafts Bearing Adapter Sleeves H3200 Series are used to compensate for a size deviation between the bearing bore and shaft diameter or to convert sizes from metric to inch Extraction sleeves are suitable when bearings...

    Contact Now

  • Adapter Sleeves H3000 Series

    Adapter Sleeves H3000 Series

    • Model No.: H3000 Series

    Adapter Sleeves H3000 Series serve to mount and remove bearings with tapered bores onto cylindrical shafts Metric Shaft Adapter H3000 Series are used to compensate for a size deviation between the bearing bore and shaft diameter or to convert sizes from metric to inch Both adapter and removal sleeves utilize lock nuts...

    Contact Now

  • Adapter Sleeves H2300 Series

    Adapter Sleeves H2300 Series

    • Model No.: H2300 Series

    Adapter Sleeves H2300 Series are suitable for locating bearings with a tapered bore into cylindrical seating as they can be used on smooth Metric Shaft Adapter H2300 Series are suitable when bearings with a tapered bore are to be located onto a cylindrical shaft Bearing Adapter Sleeves H2300 Series is pressed into the...

    Contact Now

  • Adapter Sleeves H300 Series

    Adapter Sleeves H300 Series

    • Model No.: H300 Series

    Adapter Sleeves H300 Series are suitable for locating bearings with a tapered bore into cylindrical seating as they can be used on smooth or stepped shafts Metric Shaft Adapter H300 Series are easy to mount and require no additional location on the shaft Bearing Adapter Sleeves H300 Series are using for locating...

    Contact Now

  • Adapter Sleeves H200 Series

    Adapter Sleeves H200 Series

    • Model No.: H200 Series

    Adapter Sleeves H200 Series are easy to install and require no additional location on the shaft When used on plain shafts the bearing can be located at any position on the shaft When Metric Shaft Adapter H200 Series used on stepped shafts together with an L shaped spacer ring the Bearing Adapter Sleeves H200 Series...

    Contact Now

  • Low Shaft Pillow Block  Units SBLP200 Series

    Low Shaft Pillow Block Units SBLP200 Series

    • Model No.: SBLP200 Series

    Bearing units typically consist of a housing bearing seal lubricant and shaft locking mechanism The units are preassembled and adjusted at the factory These ready to mount units are available with either ball or roller bearings In addition to standard all steel units RunFine has a selection of products that target...

    Contact Now

  • Low Shaft Pillow Block Units SALP200 Series

    Low Shaft Pillow Block Units SALP200 Series

    • Model No.: SALP200 Series

    Low Shaft Pillow Block Units SALP200 may be either split type or solid type Split type housings are usually two piece housings where the cap and base may be detached while others may be single piece housings Various sealing arrangements may be provided to prevent dust and other contaminants from entering the housing...

    Contact Now

  • Integral Shaft Bearings WB Series

    Integral Shaft Bearings WB Series

    • Model No.: WB Series

    Integral Shaft Bearings is available in type of ball to ball to roller premier water pump bearing is give high supports the advancement of power full engine with reliability through a newly developed water resistance seal with improved grease Single lip seal Water Pump Integral Shaft Bearings is the most economical...

    Contact Now

  • Adapter Sleeves H3100 Series

    Adapter Sleeves H3100 Series

    • Model No.: H31000 Series

    Adapter Sleeves H3100 Series serve to mount and remove bearings with tapered bores onto cylindrical shafts The tapered sleeve is pressed into the bearing bore until the reduction in radial clearance is achieved enabling dismantling Bearing Adapter Sleeves H3100 Series are suitable when bearings with a tapered bore are...

    Contact Now

Review

Meiya He

Sep 21, 2019 5

It’s worthy.
Katherine Bedoya

Sep 12, 2019 4

Excellent! I’m satisfied with the result, good price, good package and good service!Recommend this suppiler of Shaft Protecting Sleeve .
Mr.lucyna Bochenski

Sep 05, 2019 5

Thank you for rapid shipping. It’s Good !
win-win cooperation". We hope we can have a pleasant relationship with businessman from all around the earth. for Shaft Protecting Sleeve , Bearting Adapter Sleeves , Adapter Sleeves , we would like to provide more support for customers. Welcome all nice buyers communicate details of products with us!!
"The key to our success is ""Good Products Good quality, Reasonable Price and Efficient Service"" for Shaft Protecting Sleeve , Bearting Adapter Sleeves , Adapter Sleeves , Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee total customer satisfaction. If you are interested in any of our products and solutions or would like to discuss a custom order remember to feel free to contact me. We have been looking forward to forming successful business relationship with new clients around the world.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List

Home

Phone

Skype

Inquiry